| |
| Benefits |
| • |
Monobloc
pump, compact, economical and silent. |
| • |
Hydraulic
assembly in stainless steel: anti-corrosive safety
and increased pump service life. |
| • |
Motor
rolling bearing fitted in the front endshield, amply
dimensioned and leaktight. |
| • |
Suction
rings between very thick cells-insensitive to thermal
expansion, elimination of risks of seizing up. |
| • |
Maximum
reliability - high efficiency due to impeller profile
limiting the number of stages, shaft size and axial
thrust. |
| • |
Standardized
mechanical seals. + 100°C maximum, maintenance
free. |
| • |
Easy
installation. |
|
| Design |
| • |
Hydraulic
part |
|
ALL
STAINLESS STEEL |
|
Horizontal,
centrifugal, not self-priming.
Multi-stage from 2 to 6 stages.
Axial suction, vertical discharge upwards.
Impellers mounted directly on the motor shaft extension.
Shaft leaktightness by standardized mechanical seal.
Hydraulic assembly mounted at 8 points on a lantern
bracket. |
| • |
Motor |
|
Standard
ventilated.
Extended shaft end.
Single-phase motor with integrated thermal protection,
automatic reset.
Capacitor incorporated in the terminal box.
Guiding rolling bearings of the impeller shaft lubricated
for life. |
|
|
| Speed of rotation
|
: 2900 rpm |
| Windings three-phase |
: 230-400 V |
| Single-Phase |
: 230 V |
| Frequency |
: 50 Hz |
| |
(option 60 Hz) |
| Insulating class |
: F |
| Protection index |
: IP 54 |
|
|
|
 |
|
Hydraulic
Preselection Charts
|
 |
| Standard
Construction |
| Main
components |
Material
|
| |
Non-aggressive
Liquids |
Aggressive
Liquids* |
 |
| Body casing |
304 stainless steel |
316L stainless steel |
| Impellers |
304 stainless steel |
316L stainless steel |
| Cells (stage casing) |
304 stainless steel |
316L stainless steel |
| Pump shaft |
316L stainless steel |
316L stainless steel |
| Cell centring seal |
Carbon/ |
Tungsten carbide/ |
| |
Ceramic |
Carbon |
| Round section joint rings |
EPDM Ethylene Propylene |
VITON |
| Plugs |
316L stainless steel |
316L stainless steel |
| Fixing-support bearing |
Aluminum |
Aluminum |
|
|
NB: 304 stainless steel (X5CrNi18-10) or 316L
stainless steel (X2CrNiMo17-12) recommended materials offerings
very considerable resistance to corrosion Clean clear, fibreless
liquids conveyed and only slightly loaded in sans /silica
(40g/m maximum concentration)
|
|
Identification
of the pump
|
|
|
|
